An Evolution in Thermal Conditioning
ThermalAir TA-5000 Series of Temperature Test Systems
Temperature Conditioning System
Instead of taking your test parts that need temperature conditioning to a large oven or large environmental test chamber, our thermal test system allows you to perform your temperature profiling right where you need it – at your test bench, on your production floor or in your test laboratory.
Thermal Test Systems – Thermal Test Equipment – Temperature Test Chamber – Thermal Shock – Temperature Chambers
Some Applications:
-
Failure Analysis Testing
-
Hot/Cold Temperature Cycle Testing
-
MIL-SPEC-883 Test Methods
-
Product Engineering
-
Semiconductor Back-End Test
-
Incoming Inspection
-
IC Test Handler Verification
-
Functional Test
-
Cooling Test Article Full Cycle
-
Environmental Stress Screening
ThermalAir TA-5000A Temperature Cycling Test Systems
The ThermalAir TA-5000 series of products have a wide range of temperature test capabilities. Benchtop -60°C to +200°C applications to temperature cycling -80°C to +225°C environmental stress test. The TA-5000 series are used for temperature testing in engineering product development test labs and production test floors for semiconductor IC devices and all kinds of electronic / non-electronic components and other parts and assemblies.
ThermalAir TA-5000A
Dimensions & Working Height
Temperature Cycling Test – Temperature Forcing Systems – Temperature Chambers – Environmental Test Chambers – Environmental Test Chamber
ThermalAir TA-5000A Head with Glass Chamber
Outputs a controlled clean dry thermal air stream directly on your test part
OUTPUT TEMPERATURE CONTROL
HOW DOES IT WORK
User can control ThermalAir output temperature flow rate from 4 to 25 SCFM
(Continuous Gas Flow from -80°C to +225°C 24hrs/7days a week)! The ThermalAir temperature system is all self-contained. You just plug it in and it’s ready to start thermal testing your parts. [No configuration required].
The main temperature control of the TA-5000A is at the temperature thermocouple in the output gas nozzle. This is AIR MODE temperature control. The TA-5000A has a thermocouple imbedded in the tip of the output gas nozzle and needs no additional attached thermocouple sensors to control temperature of the ThermalAir system.
The TA-5000A has several ways to control temperature. The thermal stream system uses external thermo couples. The most common temperature thermo couple input temperature sensors the thermal stream using are T-Type & K-Type thermo couples. The MPI ThermalAir system also has multi-channel (resistance temperature detectors) RTD and Diode inputs for precise temperature control of the thermal stream system.
Thermal Test Systems – Thermal Test Equipment – Environmental Test Chamber – Thermal Test Equipment – Test Chambers
– IEEE-488
– RS232C
– 4 USB-Type A
– 1 USB-Type B
– Ethernet
– HDMI
– LAN/LXI
– Labview Drivers
PLUS Auto Start Test & End of Test for automatic temperature cycling Hot-Cold-Amb. All this makes for simple control and service ability.
Plug & Play Remote
No need to rewrite test programs
Compatible with Legacy Products
Download the Datasheets
Two Color Touch Screen Displays
The ThermalAir TA-5000A has a front panel display and a thermal head display. The thermal head color touch screen gives the user the ability to set temperature parameters and monitor all system operations at the test site location.
Thermal Test Equipment – Temperature Cycling Test – Temperature Test Chambers – Thermal Test Systems – Temperature Test Chambers
ThermalAir Color Touch Screen GUI
6 Users Friendly Easy Icons
-
MAIN Users Defined Preset Temperature Settings
-
CYCLE Hot/Cold Temperature Cycle User Profiles
-
SETUP Save/Load Temperature Parameters
-
UTILITIES Configuration, Calibration & Diagnostics
-
REVIEW Real-time & History – Full Temperature Graphs
-
DATALOG Chart Time & Temperature to USB
Remote Control Operation can be accomplished by VNC protocol to remotely view TA-5000 status and control. Remote from PC, laptop, mobile phone, and more. Install third party VNC Viewer App for IPhone and Android to control the ThermalAir TA-5000.
Specification Features & Benefits
-
Ultra Cold Temperatures maintained at 50&60Hz
-
Dual Touch Screens – front panel & thermal head
-
Plug-in anywhere from 200~250VAC, 1Ø
-
ECO smart DC system for up to 50% energy saving
-
No voltage configuration to use at different locations
-
Versatile Boom & Stand – Extended reach standard
-
SSD for thermal file management and data logging
-
Control Heated dry air purge for frost free operation
-
One touch Temp Cycle, Ramp, Soak and Dwell
-
Ultra low audible noise for quiet engineering lab use
ThermalAir TA-5000A Accessories
Thermal Adapter w/ Integrated Heated Purge
I-Purge Adapter
Compact Chamber Hood Model
Design for Performance
Semiconductor IC devices on the test bench top setup in an engineering product development environment.
MPI ThermalAir temperature forcing systems provide a direct thermal stream of clean dry hot and cold air directly to the part that needs to be thermal tested. Environmental stress screening, temperature conditioning, thermal shock and other temperature test requirements is that the ThermalAir temperature systems bring to the test.
System Performance
-
Airflow: High capacity 10 l/s (20 scfm) continuous airflow optimizes temperature transition rate and throughput.
-
Typical Temperature transition rate: -55° to +125°C: approximately 10 seconds +125° to -55°C: approximately 10 seconds
-
Temperature Control: Environment Air or External DUT sensing directly at the DUT case to ±1.0°C
-
Temperature control Sensor Ports: Type T or Type K thermocouple, and 100 ohm RTD
-
Temperature set, display and resolution: ±0.1°C
-
Temperature Accuracy: 1.0°C ( calibrated to NIST standard)
-
Remote interface ports: Four: IEEE-488, RS232C, SOT/EOT/SFF, And Ethernet, 4 USB-Type A, 1 USB-Type B, VGA, LAN, PLUS Auto Start Test & End of Test for automatic temperature cycling Hot-Cold-Amb. All this makes for simple control and service ability.
The ThermalAir TA-5000 Accessories & Thermal End Effectors
The ThermalAir TA-5000 Series Temperature Forcing System offers a fully array of accessories to help customize your thermal test application.
Test Chambers
Thermal Accessories
ThermalAir Product Line
An Evolution in Thermal Conditioning
ThermalAir TA-5000 Series of Temperature Test Systems
The ThermalAir TA-5000A is a compact, portable bench top environmental heating and cooling temperature forcing air stream system.
Instead of taking your test parts that need temperature conditioning to a large oven or large environmental test chamber, our thermal test system allows you to perform your temperature profiling right where you need it – at your test bench, on your production floor or in your test laboratory.
An Evolution in Thermal Conditioning
ThermalAir TA-5000 Series
of Temperature Test Systems
The ThermalAir TA-5000A has a front panel display and a thermal head display. The thermal head color touch screen gives the user the ability to set temperature parameters and monitor all system operations at the test site location.
Remote Interface Ports:
– IEEE-488
– RS232C
– 4 USB-Type A
– 1 USB-Type B
– Ethernet
– HDMI
– LAN/LXI
– Labview Drivers
PLUS Auto Start Test & End of Test for automatic temperature cycling Hot-Cold-Amb. All this makes for simple control and service ability.
Plug & Play Remote
No need to rewrite test programs
Compatible with Legacy Products
High Temperature Glass Chambers
The TA-5000A ThermalAir stream system is be used with a Thermal Glass Cap Enclosures interfaced to the end of Thermal Head, Arm, and Stand, designed to adapt with the end users device under test. The exact use of this adapter depends on the users thermal test application. Our thermal glass caps and thermal accessories are used in accordance with test device and of PCB size, dimension, and how and where the test broad is populated with other components. We have a wide variety of sizes to fit your test.